Airmasters Panel/ Cabinet Cooler

• Low in cost
• Compact
• SNo CFC's
• Fast installation
• Stabilize enclosure temperature and humidity
• Virtually maintenance free (No Moving Parts)
• Mounts in a standard electrical knockout
• Stops heat damage and nuisance tripping
• Eliminates fans and filters
• Prevents dirt contamination by keeping enclosure at positive pressure
• Units applicable to all environments including high temperature to 200ºF

Panel Cooler Selection

• Selecting the right Panel Cooler or Cabinet Panel Cooler or Cabinet Cooler or Air Conditioner for your panel is very important, since the wrong model can waste lot of air and not be effective. To understand which model is suitable for your panel or application, a calculation for air consumption in CFM for your panel is required to be done. For this calculation, the size of the panel and heat generated inside the panel is to be known. According to this information, the appropriate model can be selected.
• Panel Cooler are available with or without thermostat control. When constant cooling and a constant positive purge is required, we recommend the continuous operating version without the thermostat and solenoid valve. The cooling effect can be controlled by adding a regulator in line to reduce pressure for reduced cooling when it is not required and to conserve energy.
• Systems utilizing a thermostat and solenoid valve save air by activating the Panel Cooler only when the internal temperature reaches a critical level. The adjustable thermostat is factory set at 28°C but can be readjusted on site. Thermostat and solenoid valve systems are recommended where the heat load can fluctuate (such as for frequency drives) and where a continual purge is not required. The thermostat and solenoid “package” can also be added at a later date to a continuous system.